TBS Oblivion PNP

The TBS Oblivion PNP is built from a virtually unbreakable custom material mix, this allows the TBS Oblivion PNP not only protects all of your electronics, but also ensures the structure maintains its shape after impacts. The manufacturing process of the TBS Oblivion PNP is a careful balancing act between rigidigty, durability and weight, which was of the most importance. The end result is a sleek, highly aerodynamic, ultra durable, long-range, racing or freestyle drone that will not disappoint.

The TBS Oblivion PNP is more suitable for those who already own their own R/C equipment. Just add your own Tx and Rx that uses any of the CRSF, S-Bus, Spektrum protocols, you will be able to get yourself set up and flying in minutes. The recommended Lipo battery (not supplied), is a 1300-2200 mAh 4s either of the Gensace Tattu R-Line 1300 95C or the Tattu R-Line 1550mAh batteries will give the TBS Oblivion PNP maximum performance. 

With less than 10 minutes prep you can have the TBS Oblivion PNP into the air, and without the need of years of experiencing in building and tuning racing quads. There is also the Velocidrone FPV simulator, this has the model pre-installed inside, so you can practice from the comfort of your home before heading to the local field and flying for real.

The whole of  the TBS Oblivion PNP drone is built from countless self-contained parts working together for a unified user experience. With just the right amount of exposure to the inner workings of a modern racing drone, anyone can start their adventure into this incredible hobby. Parts can be replaced and repaired without soldering, keeping bench tinkering time to a minimum ensuring more time spent flying.

For those who are new to the hobby and do not own any R/C equipment, the TBS Oblivion RTF Set package may be more suitable.

 

Features

• Flight Time: 3-4 mins typical, up to 11mins with 1300mAh 4S. (Gensace 1300-1550 95C R-Line also recommended)

• Weight: 315g w/o battery

• Motors: Custom Cobra CT-2205-2400kV

• Battery: 4s LiPo 1300mAh – 2200mAh

• Propeller: HQ 5×4.5×3 V3 Tri-Blade propellers

• Flight controller: TBS Colibri F3 with BetaFlight 3.3

• ESCs: BLHeli-S Multishot TBS PowerCube 20A 6S ESC’s

• Camera: TBS Oblivion 650TVL FPV Camera

• Receiver Compatibility: CRSF, S-Bus, Spektrum™ compatible