Futaba T6K V3 8 Channel 2.4GHz T-FHSS & R3006SB Combo Mode 2

Futaba T6K V3 8 Channel 2.4GHz T-FHSS & R3006SB Combo Mode 2

The new Futaba T6K V3 8 channel radio controller is the perfect entry/sport level radio controller for aircraft, Multi Rotor and helicopter pilots. This stylish radio transmitter features a clean in-built aerial system, an easy-to-use jog dial for programming and a backlit LCD screen for a clear display. The Futaba T6K V3 8 channel is not only a great-looking radio control system it also includes many features you would normally expect in the high-end transmitters in the Futaba range.

The Futaba T6K V3 has been designed to take full advantage of Futaba’s popular T-FHSS telemetry system, this means that a wide array of data can be monitored in flight, this information can be seen on screen or you can listen to this information using the in-built speaker. The T6K V3 8 channel includes standard receiver battery voltage and external battery voltage, you can add additional sensors to monitor temperature, RPM, altitude and even a variometer sensors are available as options. The T6K V3 is also capable of using S.Bus/S.Bus2 servos, these can be easily programmed via the transmitter, whilst these and standard servos can all be used with the supplied R3006SB receiver.

This radio requires 4 x AA cells to power.

Features:

• S-FHSS/T-FHSS selectable

• Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer

• Built-in antenna

• S.Bus/S.Bus2 servo setting functions programmable through the transmitter

• Preset vibration alarms

• 30 model memory

• 8-character model/user naming

• Programmable mixes for aeroplanes, helicopters, gliders and multi-rotors

• Digital trims with variable step settings

• Adjustable stick length and tension

• Changeable switch/VR position and AUX channel function

• Throttle position warning

• Backlit 128×64 DOT LCD screen with adjustable display contrast

• Software updateable through the CIU-2

• Screen Lock

• Earphone/S.Bus/Trainer jacks

• Assignable switches (three 3-position, one 2-position)

• Range Check

• Program navigation bay with jog dial, +/- pads and end pad

• Data reset 

• Model copy 

• Selectable model type

• Fail-Safe

• End Points

• Trim/Trim Resets/Trim Steps

• Sub Trim

• Servo Reversing

• Parameter functions

• Servo monitor/Test

• Wireless model data transfer

• Timer-System and Model (Up/Down)

• Trainer system

Aeroplane Functions:

• Wing Type (5-wing, 2-tail)

• Throttle Cut

• Dual Rate/Expo

• Throttle Curve

• Idle down

• Gyro

• Aileron differential

• V-Tail

• Camber

• Air Brake

• Elevator-to-Flap mixing

• Flap-to-Elevator mixing

• Elevon mixing

Glider Functions:

• Wing Type (5-Wing, 2-Tail)

• Condition Select

• Dual Rate/Expo

• Motor switch

• Gyro

• Aileron Differential

• V-tail

• Butterfly mixing

• Trim mixing

• Elevator-to-Camber mixing

• Camber mixing

• Aileron-to-Camber mixing

Helicopter Functions:

• Swash type (6)

• Condition Select

• Throttle Cut

• Dual Rate/Expo

• Trim Offset

• Delay

• Gyro mixing

• Swash AFR

• Swash mixing

• Throttle Curve (5-point)

• Pitch Curve (5-point)

• Pitch-to-Rudder mixing

• Throttle Hold

• Hovering throttle

• Hovering pitch

Multicopter Functions:

• Flight Mode

• Centre alarm

• Dual Rate/Expo

• Throttle Curve

• Throttle Delay

• Gyro Required