Finwing 390 Degree Pan Tilt Mechanism

The Finwing 390 Degree Pan Tilt Mechanism, is essentially a 2 axis gimbal allowing you to have a realistic in flight POV adding extra realism to your FPV flying experience. Allowing for a 390 degree pan and roughly 30 degree of vertical travel.

The gimbal can be used on a variety of aircraft, but was specifically designed to be used with the Finwing Air Titan, Penguin and Sabre air frames. All parts including mounting hardware and servo’s are supplied in the kit along with instructions, needing minimal assembly. The pan servo is a standard size servo and the tilt is a sub-micro.

Requiring either 2 auxilary channels on your radio receiver will allow you to pan and tilt the camera via your radio transmitter. Or you can use the Head Tracker feature as found with the Fat Shark v2 Attitude or Dominator v3 HD goggles for a more natural feel.

Note: If using the Dominator v3 goggles, you will need the Fat Shark Trinity Head Tracker Module, sold separately.

This product is designed to work with Go Pro Hero 2, 3 and 4 (with or without waterproof case). As well as the Mobius, and most small FPV camera’s. 

Specification.

Functions: Pan and Tilt

Supported Camera: Go Pro Hero 2, 3 and 4 (with or without waterproof case) Mobius, and most small FPV camera’s

Pan Servo: Standard size, 390 degree rotation, metail geared

Tilt Servo: Sub-micro 17g 60 degree servo, plastic geared

Weight (w/out camera): 160 grams

Material: Plywood