DJI E310 2312 Motor CW

DJI E310 2312 Motor CW

The DJI E310 2312 Motor CW are a 960 Kv motor which adopts a pioneering stator winding structure, which has a double layer, single wire stator. This technology increases the wire embedding in between the stator arms; this allows any heat build-up in the motor to be dissipated quicker. The other advantage to the 2312 motor’s single wire design is the increase in efficiency, the lay out of the single wire winding means that the 2312 motors are able to work at higher Amp draws without seeing any increase in heat.

The E310 2312 motor also has seen a 25% output improvement over the 2212 motors when used on the same battery (3s LiPo), DJI report that there is an extra 200 grams of thrust to be found on each motor for no additional Amp draw from the battery when used with the 9450 Self-Tightening Propellers (Thrust Boosted).

The improvements seen on the 2312 motors continue with impact resistant bearings fitted as standard, these motors are the most durable and efficient motors to come from the team at DJI. The new electromagnetic insulation coating on the 2312 motors have been designed to work in harmony with the DJI flight controller range for improved flight performance.

 

2312 Motor Specifications: 

• Recommended load: 350 g /axis 3S Lipo / 400g /axis 4S LiPo

• Recommended battery: 3S – 4S Lipo

• Maximum Thrust: 800 g/axis

• Working Temperature: -5°C to 40°C

• Stator Size: 22 × 12mm

• KV: 960 rpm/V

• Weight: 60g